Speedor Conveyor

British manufactured internal high-speed fabric conveyor doors for airports and logistics

Hart's revolutionary high-speed conveyor door is suited to specialist applications such as high-frequency conveyor belt systems, providing security, safety, and compartmentalisation between public areas and baggage system mechanics.

The high-speed door closure integrates with the conveyor system and relevant inputs and outputs to meet any requirement.

Whether machine protection, baggage handling, or material handling, Hart's fast action conveyor doors improve safety, efficiency and reliability in these automated areas.

Operating at high speed these rapid roll doors are designed for exceptionally high cycle frequency. These rugged doors are reliable, easy to install and require low maintenance. Cyclic tests were completed at the Hart production facility to over 2,500,000 cycles within three months.

Pre-assembled on a self-supporting frame allows the door to be commissioned before leaving the production facility. This reduces site installation time so the doors can be connected to power/controls and be immediately functional.

Additional security and fire protection are available, such as those we supplied to Heathrow Airport and Nissan Battery Facility.

If you’d like to speak to us about how we can help you solve logistical challenges with a completely tailored high-speed door solution, please contact us today on +44 (0) 191 214 0404

Colour Options
Size Options
  • Up to 2m high 
  • Up to 2m wide
Speed Options
  • Standard opening – 1.0m sec
  • Standard closing – 0.4m sec
  • Variable speed options from 0.5mps up to 1.5mps. 

Features & Benefits

  • Fast open and close for maximum environmental control and energy
    usage reduction
  • Unique design, optimising flow of traffic and improving room climate
  • Extremely reliable making them a cost effective solution
  • Galvanised steel construction for enhanced strength
  • Highest levels of safety to protect your personnel and equipment
  • Tested and certified for full compliance
  • UKAC/CE approved for full standard conformity
  • Technologically advanced features to boost efficiency

What Hart Has To Offer

1 year warranty
as standard

CE/UKCA mark

Designed and
manufactured in UK

LPCB approved

Design Options

  • Size: Custom- size up to 2000 mm
  • Colour: Yellow, Blue, Red, Green, Grey
  • Available in with fire rating and/or smoke screen specification
  • Self-supporting frame for easy and rapid installation. Factory built and tested as an assembled unit before despatch
  • Bespoke control panels with plug and play connections designed to meet individual clients specification requirements
  • Solenoid locking
  • Fire and/or smoke prevention
  • Plug and play connections to BHS/BMS
  • Bespoke design to suit restricted envelopes on site

See NBS Specification


  • Baggage Handling Systems
  • Check in Areas
  • Machine Protection
  • Material Handling
  • Conveyor Systems
  • Manufacturing area separation

Related Case Studies

Manufactured to International Standards


The motor unit is a three phase direct drive motor unit complete with encoder unit. The motor will be inverter driven providing high, variable speed and includes soft start and stop.

Control panel

The control panel conforms to the standard EN60204-1 and has an external IP rating of 54 and an internal IP rating of 2X.



Door Dimensions: max 2000 x 2000 mm. All doors are made to measure to specific requirements.


Multilayer 2400g PVC and textile combine to ensure excellent strength, tear-resistance and long life. The curtain has very good isolation properties, high scratch resistance and is easy to clean. Curtain braces are fixed horizontally within a contrasting PVC pocket which not only offer further strengthening and wind resistance, but also add to the visual appearance of the door system. View Speedor 2mm Twin Layer Fabric Datasheet


The door can be integrated into the customers control system and will stop on a signal as instructed. Additional safety systems specified by the client can be fitted to the door due to the flexibility of the control panel.


Side frames are manufactured from galvanised steel and powder coated to suit. Metal hood covers and infills can all be provided in galvanised steel with optional powder coated finish or Stainless steel.


Operation is usually via full integration with the conveyor system complete with all the relevant inputs and outputs equipped to deal with virtually any installation.



Standard opening Speed: 1.0 m/s
Standard Closing Speed:  0.4 m/s

  • Manufactured under ISO 9001:2015
  • Machinery Directive 2008 26/42/EC
  • BSEN 12453 & BSEN12444 the machinery directive safety in use of power operated doors
  • BSEN 12978 Safety devices for power operated doors
  • BSEN 12625 – requirements for the safe installation and use

Need Technical Advice?

Call us now on +44 (0) 191 214 0404
or click below to get in touch

Make an Enquiry

We use cookies to provide you with a better website experience.

More Info I Agree