Terror Screen SR1 - LPS1175 SR1 Security Shutter

LPS1175 SR1 British manufactured Security roller shutters

Security Rating 1 is the entry level security rating tested and approved to loss Prevention Standards LPS 1175 SR1, certified by the Loss Prevention Certification Board (LPCB). Classified as domestic and low commercial risk, these security shutters provide resistance to tools in Category A. The tools of this category simulate an opportunist attack by bodily physical force and using easily concealed tools.

ATTACK TIME

The maximum attack time is 1 minute. The maximum test duration is 10 Minutes

TOOLS CATEGORY A

Adhesive tape, Knife, Cable cutter, Lever (including nail pullers, prybars and utility bars), Pliers, Punches, Rope, Electric cable, Cargo strap, Screwdriver, Engineers hooks, Spanners, Firefighters key, Tweezers, Fishing line, Universal Key, Glass cutter, Wire, Hexagon wrenches, Wood/plastic wedges

If you’d like to speak to us about how we can help you solve logistical challenges with a completely tailored high-speed door solution, please contact us today on +44 (0) 191 214 0404

Colour Options

Standard RAL Colours

Size Options
  • Up to 9m high
  • Up to 9m wide
Speed Options
  • Standard opening – 0.15m sec
  • Standard closing – 0.15m sec

Features & Benefits

  • Attack Prevention
  • Security performance
  • Asset protection
  • Public Safety
  • Unauthorised access restriction
  • Insurance compliance
  • Reduced risk of crime

What Hart Has To Offer

1 year warranty
as standard

CE/UKCA mark

Designed and
manufactured in UK

LPCB approved

Design Options

  • Size: Custom- size up to 9000 mm
  • Fire compliance
  • Various locking options available, from simple pin locking to fully automatic operation
  • Choice of colours and finish
  • Lock status signal options
  • Hood covers
  • Choice of operators
  • Infills and Flashings

See NBS Specification

Applications

  • Banks
  • Military Installations
  • Government buildings
  • Museums
  • Nuclear Facilities
  • Detention Centres
  • Prisons
  • Chemical Industries
  • Airports
  • Data Centres
  • Hazardous Environments
  • Security Risk Control Buildings
  • Warehouses

Related Case Studies

Manufactured to International Standards


Motor

Depending on door size the motor drive is constructed using either “Safedrive” direct drive or via chain drive and reduction gearing supported via a safety brake. The roller tube is adequate for the door dimension and will have a deflection ratio of less than 400:1.

ENGINEERING

Size

Doors are available from 1.2 metre wide to 9 metres wide and up to 9 metres high. All doors are made to measure to specific requirements. For a higher security rating or extreme wind conditions we recommend the SR2-4 Terror Screen doors or our unique Typhoon security shutter.

Curtain

The door curtain is formed from 73mm convex steel galvanised interlocking steel roller shutter laths retained at ends via end locks. Solid or perforated sections.

The bottom rail is a “T” section interlocking section with optional rubber seal. The curtain is available in plastisol or powder coat finish to standard colours, larger sizes may need to be wet coat finished.

Locking

  • Manually operated slip bolts on the bottom rail or pin locks on the guide, manually interlocked to the control panel to prevent accidental operation.
  • Electrically operated by press button when the door is closed
  • Fully automated.
  • Optional Monitoring and signalling of lock status.

Size Guides

Fabricated from steel continuous angle and steel guide channel in galvanised finish and bolted at fixed centres to an appropriate structure. The guides optionally are available in power coat finish.

Frames/Hoods

Optional hood, motor hood, flashings in galvanised steel materials or in powder coat. Stainless steel options also available.

Operators

The door can be press button operated or automatically operated. Various levels of safety can be fitted including safe leading edge and or photocells movement sensors and so on. Controls should be mounted at least 1m from the door structure.

Fixing

Structural opening substrate must be suitably reinforced brickwork/concrete/steelwork as detailed in the standard LPS1175 Issue 7. It is assumed that the substrate onto which the product is fitted provides a resistance to attack at least equivalent to that afforded by the product itself.

PERFORMANCE

Speed

Standard opening Speed: 0.15 m/s
Standard Closing Speed: 0.15 m/s

  • Manufactured under ISO 9001:2015
  • Machinery Directive 2008 26/42/EC
  • BSEN 12453 & BSEN12444 the machinery directive safety in use of power operated doors
  • BSEN 12978 Safety devices for power operated doors
  • BSEN 12625 – requirements for the safe installation and use

Need Technical Advice?

Call us now on +44 (0) 191 214 0404
or click below to get in touch

Make an Enquiry

We use cookies to provide you with a better website experience.

More Info I Agree